Multistable Polyhedral Origami Modules for Curved Surface Assembly
M. Lee, K. Sharifmoghaddam, and T. Tachi
IASS 2024 Symposium (2024)
Diffused Tomography - Design ideation on architectural models through image sequences
M. Bank, J. Schlusche, S. Rasoulzadeh, K. Schinegger, and S. Rutzinger
Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) (2024)
Structural Cellulose
M. Wacker, J. Megens, M. Heimrath, M. Königsberger K. Schinegger, and S. Rutzinger
Scalable Disruptors. DMS 2024. Springer (2024)
Stiffness Simulation with Haptic Feedback Using Robotic Gripper and Paper Origami as End-Effector
K. Vasylevska, M. Ghazanfari, K. Sharifmoghaddam, S. Mortezapoor, E. Vonach, H. Brument, G. Nawratil, and H. Kaufmann
2024 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops (VRW) (2024)
Interactive design of discrete Voss nets and simulation of their rigid foldings
M. Kilian, G. Nawratil, M. Raffaelli, A. Rasoulzadeh, and K. Sharifmoghaddam
Computer Aided Geometric Design, Volume 111 (2024)
View-Independent Adjoint Light Tracing for Lighting Design Optimization
L. Lipp, D. Hahn, P. Ecormier-Nocca, F. Rist, and M. Wimmer
ACM Transactions on Graphics 43 (3), 35 (2024)
Meshes with Spherical Faces
M. Kilian, A. S. Ramos Cisneros, C. Müller, and H. Pottmann
SIGGRAPH Asia / ACM Transactions on Graphics, 42 (6), 184 (2023)
Filament-Reinforced 3D Printing of Clay
J. Jauk, L. Gosch, H. Vašatko, M. Königsberger, J. Schlusche, and M. Stavric
Materials, 16 (18), 6253 (2023)
Coextrusion of Clay-Based Composites: Using a Multi-Material Approach to Achieve Gradient Porosity in 3D-Printed Ceramics
J. Jauk, H. Vašatko, L. Gosch, K. Ristoski, J. Füssl, and M. Stavric
Ceramics, 6 (4), 2243-2255 (2023)
Precomputed Radiative Heat Transport for Efficient Thermal Simulation
C. Freude, D. Hahn, F. Rist, L. Lipp, and M. Wimmer
Computer Graphics Forum, 42 (7) / Pacific Graphics (2023)
Bridging the gap – A study on foldable tubular bridges
R. Maleczek, K. Sharifmoghaddam, G. Nawratil, and C. Preisinger
Proceedings of IASS Annual Symposia, Melbourne Symposium: Origami (2023)
Environmental potential of fungal insulation: a prospective life cycle assessment of mycelium-based composites
N. Alaux, H. Vašatko, D. Maierhofer, M. Ruschi Mendes Saade, M. Stavric, and A. Passer
Int J Life Cycle Assess (2023)
Generalizing rigid-foldable tubular structures of T-hedral type
K. Sharifmoghaddam, R. Maleczek, and G. Nawratil
Mechanics Research Communications, 132 (2023)
The Theatre Metaphor For Spatial Computing In Architectural Design
B. I. Kovács, I. Erb, K. Sharifmoghaddam, L. Lipp, M. Wimmer, and P. Ferschin
Creative Construction Conference (2023)
Action-Origami Inspired Haptic Devices for Virtual Reality
K. Vasylevska, T. Batik, H. Brument, K. Sharifmoghaddam, G. Nawratil, E. Vonach, S. Mortezapoor, and H. Kaufmann
ACM SIGGRAPH 2023 Emerging Technologies (2023)
Transformable Luminaire Design: From digital sketch to fabrication through computation and simulation
P. Ferschin, G. Suter, M. Palma, I. Erb, D. Hahn, B. I. Kovács, G. Nawratil, and K. Sharifmoghaddam
Proceedings of the 41 st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) (2023)
CoboDeck: A Large-Scale Haptic VR System Using a Collaborative Mobile Robot
S. Mortezapoor, K. Vasylevska, E. Vonach, H. Kaufmann
IEEE Conference Virtual Reality and 3D User Interfaces (VR) (2023)
Smooth and Discrete Cone-Nets
M. Kilian, C. Müller, and J. Tervooren
Results in Mathematics, 78 (2023)
Common Ground—Online Platforms for Bottom-Up Collaborative Decision Making in Design Education
N. Stephan, M. Lemarié, and K. Schinegger
CDRF 2022: Hybrid Intelligence, pp. 65–77 (2023)
Collapsing Complexities: Encoding Multidimensional Architecture Models into Images
V. Sándor, M. Bank, K. Schinegger, and S. Rutzinger
CDRF 2022: Hybrid Intelligence, pp. 371–381 (2023)
Origami-like quasi-mechanisms with an antiprismatic skeleton☆
G. Nawratil
Mechanism and Machine Theory, 181 (2023)
Multiscale micromechanics modeling of plant fibers: upscaling of stiffness and elastic limits from cellulose nanofibrils to technical fibers
M. Königsberger, M. Lukacevic, and J. Füssl
Materials and Structures, 56 (2023)
Integrative Mixed Reality Sketching
B. I. Kovács, K. Sharifmoghaddam, J. Jauk, and I. Erb
Proceedings of the Creative Construction e-Conference (2022)Potential of Parametric Modeling for Structural Optimization A Variant Study of Industrial Buildings with Different Timber Structure Systems
D. Daleyev, J. Reisinger, M. Königsberger, I. Kovacic
Proc. Creative Construction e-Conference (CCC) (2022)
Linking Early Design Stages with Physical Simulations using Machine LearningStructural Analysis Feedback of Architectural Design Sketches
S. Rasoulzadeh, V. Senk, I. Kovacic, J. Reisinger, J. Füssl, M. Hensel
29th International Workshop on Intelligent Computing in Engineering (EG-ICE) (2022)
Nonrigidity of flat ribbons
M. Raffaelli
Proc. Royal Society of Edinburgh Section A: Mathematics (2022)
Photogrammabot: An Autonomous ROS-Based Mobile Photography Robot for Precise 3D Reconstruction and Mapping of Large Indoor Spaces for Mixed Reality
S. Mortezapoor, C. Schönauer, J. Rüggeberg, and H. Kaufmann
IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops (VRW) (2022)
On Continuous Flexible Kokotsakis Belts of the Isogonal Type and V-Hedra with Skew Faces
G. Nawratil
Journal for Geometry and Graphics, 26 (2022)
A controlled shaping method through the shrinkage of clay
L. Gosch, H. Vašatko, J. Jauk, E. Šamec, I. Zivkovic, M. Stavric
Proc. IASS Symposium (2022)
Fabricating lightweight ceramics by spraying clay on knitted structures
L. Gosch, J. Jauk, H. Vašatko, E. Šamec, M. Raffaelli, S. Rutzinger, and M. Stavric
International Journal of Architectural Computing, 20 (2022)
Computational design of weingarten surfaces
D. Pellis, M. Kilian, H. Pottmann, and M. Pauly
ACM Transactions on Graphics, 40 (2022)
Generalizing continuous flexible Kokotsakis belts of the isogonal type
G. Nawratil
Proceedings of the 20th International Conference on Geometry and Graphics (ICGG) (2022)
Multi-stable design of triangulated origami structures on cones of revolution
G. Nawratil
Computer Aided Geometric Design (2022)
On origami-like quasi-mechanisms with an antiprismatic skeleton
G. Nawratil
Advances in Robot Kinematics (2022)
Advanced Computational Design – digitale Methoden für die frühe Entwurfsphase
M. Wimmer, I. Kovacic, P. Ferschin, F. Rist, M. Hensel, K. Schinegger, S. Rutzinger, H. Kaufmann, M. Kilian, C. Müller, I. Izmestiev, G. Nawratil, J. Füssl, M. Stavric, D. Hahn, G. Suter
Bautechnik 99, H. 10 (2022)
Learning Spatiality - A GAN method for designing architectural models through labelled sections
M. Bank, V. Sandor, K. Schinegger, and S. Rutzinger
Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) (2022)
Hybrid Immediacy: Designing with Artificial Neural Networks Through Physical Concept Modelling
M. Bank, V. Sandor, R. Kraft, S. Antholzer, M. Berger, T. Fabini, B. Kovacs, T. Hell, S. Rutzinger, and K. Schinegger
Design Modelling Symposium Berlin, DMS 2022: Towards Radical Regeneration (2022)
Basic Research of Material Properties of Mycelium-Based Composites
H. Vašatko, L. Gosch, J. Jauk, and M. Stavric
Biomimetics, 7(2), 51 (2022)
MyCera. Application of mycelial growth within digitally manufactured clay structures
J. Jauk, L. Gosch, H. Vašatko, I. Christian, A. Klaus, and M. Stavric
International Journal of Architectural Computing (2022)
Snappability and singularity-distance of pin-jointed body-bar frameworks
G. Nawratil
Mechanism and Machine Theory, 167 (2022)
Shape-morphing mechanical metamaterials
C. Jiang, F. Rist, H. Wang, J. Wallner, H. Pottmann
Computer-Aided Design 143 (2022)
Safety and Security Challenges for Collaborative Robotics in VR
S. Mortezapoor, K. Vasylevska
Proc. International Workshop on Security for XR and XR for Security (VR4Sec) at Symposium On Usable Privacy and Security (SOUPS) (2021)
CLAYKNIT A composite structure of clay and knitted meshes
L. Gosch, J. Jauk, H. Vašatko, E. Šamec, and M. Stavric
Education and Research in Computer Aided Architectural Design in Europe 39 (2021)
Using Flexible Trapezoidal Quad-Surfaces for Transformable Design
K. Sharifmoghaddam, G. Nawratil, A. Rasoulzadeh, and J. Tervooren
IASS Annual Symposium and Spatial Structures Conference (Surrey, UK) (2021)
Digital Fabrication of Growth - Combining digital manufacturing of clay with natural growth of mycelium
J. Jauk, H. Vasatko, L. Gosch, I. Christian, A. Klaus, and M. Stavric
CAADRIA (2021)
Clay-Mycelium Composite - Using Mycelial Growth as Fibre Reinforcement for Unfired Clay
J. Jauk, H. Vasatko, L. Gosch, I. Christian, A. Klaus, and M. Stavric
CCBDT (2020)
Four-bar linkages, elliptic functions, and flexible polyhedra
I. Izmestiev
Computer Aided Geometric Design, 79 (2020)
Architectural freeform surfaces designed for cost-effective paneling mold re-use
D. Pellis, M. Kilian, H. Wang, C. Jiang, C. Müller, and H. Pottmann
Advances in Architectural Geometry (2020)
Principal symmetric meshes
D. Pellis, H. Wang, M. Kilian, F. Rist, H. Pottmann, and C. Müller
ACM Trans. Graph. 39, 4, 127 (2020)
